Indicator Lamp; Setting The Air Distribution; Setting The Temperature - Mercedes-Benz SLS AMG GT Coupe Operator's Manual

Operating the climate control systems
110
Problems with the "Cooling with air dehumidification" function
Problem
The indicator lamp in
the ¿ button
flashes three times or
remains off. The
"Cooling with air
dehumidification"
function cannot be
switched on.
Setting climate control to automatic
General notes
In automatic mode, the set temperature is
controlled automatically. The system
automatically regulates the temperature of
the dispensed air, the airflow and the air
distribution.
The automatic mode functions optimally
when the "Cooling with air dehumidification"
function is activated. If necessary, cooling
with air dehumidification can be deactivated.
If you deactivate the "Cooling with air-
dehumidification" function, the air inside the
vehicle will not be cooled. The air inside the
vehicle will also not be dehumidified. The
windows can fog up more quickly. Therefore,
deactivate the cooling with air-
dehumidification function only briefly.
Activating/switching
Select key position 2 with the Start/Stop
X
button ( page 119).
Y
Set the desired temperature.
X
Possible causes/consequences and M M Solutions
Cooling with air dehumidification has been deactivated due to a
malfunction.
Visit a qualified specialist workshop.
X
X
X
Different temperatures can be set for the
driver's and front-passenger sides.
X
X
Air distribution settings
¯ Directs air through the defroster vents
P Directs air through the center and side
O Directs air through the footwell air
To activate: press the à button.
The indicator lamp in the à button lights
up. Automatic air distribution and airflow
are activated.
To switch to manual mode: press the
à button.
The indicator lamp in the à button goes
out. Automatic air distribution and airflow
are deactivated.

Setting the temperature

Select key position 2 with the Start/Stop
button ( page 119).
Y
To increase/reduce: turn controls : and
D clockwise or counter-clockwise
( page 107).
Y
Only change the temperature setting in
small increments. Start at 72 ‡ (22 †).

Setting the air distribution

air vents
vents