General Notes; Display Messages; Message Memory - Mercedes-Benz CLS Operator's Manual

Display messages

228
Display messages
Introduction

General notes

Display messages appear in the multifunction display.
Display messages with graphic displays may be shown in simplified form in the Operator's
Manual and may differ from the messages shown in the multifunction display.
Please respond in accordance with the display messages and follow the additional notes in
this Operator's Manual.
Certain display messages are accompanied by an audible warning tone or a continuous tone.
When the ignition is switched off, all display messages are deleted, apart from some high-
priority display messages. Once the causes of the high-priority display messages have been
rectified, the corresponding display messages are also deleted.
When you stop and park the vehicle, please observe the notes on:
HOLD function (
R
Parking ( Y page 157)
R
Hiding display messages
X
Press the a or % button on the steering wheel to hide the display message.
The display message is cleared.
The multifunction display shows high-priority display messages in red. Some high-priority
display messages cannot be hidden.
The multifunction display shows these messages continuously until the causes for the
messages have been remedied.

Message memory

The on-board computer saves certain display messages in the message memory. You can
call up the display messages:
X
Press the = or ; button on the steering wheel to select the
If there are display messages, the multifunction display shows
X
Press the 9 or : button to select the entry, e.g.
X
Press a to confirm.
X
Press the 9 or : button to scroll through the display messages.
Y page 178)
Serv.
menu.
2 Messages, for example.
2 Messages.