Service Menu; Activating/Deactivating; Settings Menu - Mercedes-Benz CLS Operator's Manual

For further information about ATTENTION
ASSIST, see ( Y page 191).
Activating/deactivating Blind Spot
Assist
X
Press = or ; on the steering wheel
to select the DriveAssist
X
Press the 9 or : button to select
Blind Spot Asst..
X
Press the a button.
The current selection is displayed.
X
To activate/deactivate: press the a
button again.
Blind Spot Assist Sensors
If the
Deactivated Act. Blind Spot Asst.
or
Sensors Deactivated
the radar sensor system is deactivated.
X
Switch on the radar sensor system
( Y page 223).
For further information about Blind Spot
Assist, see ( Y page 195).
For further information about Active Blind
Y
Spot Assist, see ( page 199).
Activating/deactivating Lane Keeping
Assist
X
Press = or ; on the steering wheel
DriveAssist
to select the
X
Press the 9 or : button to select
Lane Keep. Asst.
X
Press the a button.
The current selection is displayed.
X
Press a to confirm.
When Lane Keeping Assist or Active Lane
Keeping Assist is activated, the à symbol
appears in the multifunction display when the
ignition is on.
For further information about Active Lane
Keeping Assist, see (
menu.
message appears,
menu.
Y page 202).
Menus and submenus

Service menu

Serv.
In the menu, you have the following
options:
calling up display messages in message
R
memory ( Y page 228)
restarting the tire pressure loss warning
R
system ( Y page 333)
checking the tire pressure electronically
R
( Y page 334)
calling up when a service is due
R
( Y page 302)

Settings menu

Introduction
Sett.
In the menu, you have the following
options:
change the instrument cluster settings
R
( Y page 220)
change the light settings (
R
change the vehicle settings (
R
change the convenience settings
R
( Y page 223)
restore the factory settings (
R
219
Y page 220)
Y page 222)
Y page 224)
Z