Table of Contents
Advertisement
† Existing Windows Server 2008/2003 Driver Installation
1. Insert the MSI CD into the CD-ROM drive.
2. The CD will auto-run and the setup screen will appear.
3. Under the Server Drivers tab, click on SATA2 RAID Install.
4. The drivers will be automatically installed.
† Confirming Windows Server 2008/2003 Driver Installation
1. Under W indows Server 2008/2003, open the Control Panel from My Com-
puter followed by the System icon.
2. Choose the Hardware tab, then click the Device M anager tab.
3. Click the "+" in front of the SCSI and RAID Controllers hardware type. The
driver Intel(R) ICH10R SATA RAID Controller should appear.
Intel ICH10R SATA RAID
A-11
Advertisement
Table of Contents
