Degraded Raid Array - MSI X79A-GD45 (8D) series User Manual

Degraded RAID Array

A RAID 1, RAID 5 or RAID 10 volume s reported as degraded when one of ts hard drve
members fals or s temporarly dsconnected, and data mrrorng s lost. As a result, the
system can only utlze the remanng functonal hard drve member. To re-establsh
data mrrorng and restore data redundancy, refer to the procedure below that corre-
sponds to the current stuaton.
Mssng Hard Drve Member
1. Make sure the system s powered off.
2. Reconnect the hard drve.
3. Reboot the system to Wndows; the rebuld wll occur automatcally.
Faled Hard Drve Member
1. Make sure the system s powered off.
2. Replace the faled hard drve wth a new one that s of equal or greater capacty.
3. Reboot the system to Intel RAID Opton ROM by press <Ctrl> and <I> keys smul-
taneously durng the Power-On Self Test (POST).
RAID Volumes
ID Name
0 Volume0
Physcal Dsks:
Port Devce Model
1 XXXXXXXXXXXXX
2 XXXXXXXXXXXXX
Press <CTRL-I> to enter Configuraton Utlty..
4. Select the port of the destnaton dsk for rebuldng, and then press ENTER.
1. Create RAID Volume
2. Delete RAID Volume
"Degraded" volume and dsk avalable for rebuldng detected. Selectng
a dsk ntates a rebuld. Rebuld completes n the operatng system.
RAID Volumes :
None defined.
Port Drve Model
1
Physcal Devces :
Port Devce Model
1 XXXX-XXXXXXXX
2 XXXX-XXXXXXXX
[ ↑↓] - Select
Level Strp Sze
RAID 1(Mrror) N/A XXX.XGB
Seral #
XXXXXXXXXXXXX
XXXXXXXXXXXXX
MAIN MENU
[
[
DEGRADED VOLUME DETECTED
5. Ext
DISK / VOLUME INFORMATION
[
Select the port of the destnaton dsk for rebuldng (ESC to ext):
Seral #
XXXX-XXXXXXXX XXXXXXXXXXXXXX
Seral #
XXXXXXXXXXXXXX
[ ↑↓] - Prevous/ Next [ENTER] - Select
XXXXXXXXXXXXXX
[ESC] - Ext
Status Bootable
Degraded Yes
Sze Type/Status(Vol ID)
XXX.XGB Member Dsk (0)
XXX.XGB Member Dsk (0)
]
3. Reset Dsks to Non-RAID
]
4. Recovery Volume Optons
]
Sze
XXX.XGB
Sze Type/Status (Vol ID)
XXX.XGB Non-RAID Dsk
[ESC] - Ext
XXX.XGB Non-RAID Dsk
[ENTER] - Select Menu
MS-7760 MS-7760
B-11