▶
On-Chip ATA Devices
Press <Enter> to enter the sub-menu and the following screen appears:
▶
PCI IDE BusMaster
This item allows you to enable/ disable BIOS to used PCI busmastering for reading/
writing to IDE drives.
▶
On-Chip SATA Controller
This item allows users to enable or disable the on-chip SATA controller.
▶
RAID Mode
This item is used to select mode for on-chip SATA connectors.
▶
AHCI Configuration
When the "RAID Mode" sets to [AHCI], this field is available. Press <Enter> to enter
the sub-menu and the following screen appears:
▶
AHCI Port 1/2/3/4/5/6
Press <Enter> to enter the sub-menu.
▶
AHCI Port 1/2/3/4/5/6
Select the type of device.
▶
I/O Devices
Press <Enter> to enter the sub-menu and the following screen appears:
▶
COM Port 1
Select an address and corresponding interrupt for the serial port.
MS-7522
MS-7522
3-11