NAD T 748 Owner's Manual page 26

OPERATION
USING THE T 748 – SETUP MENU
SAMPLE PROCEDURE FOR SETTING UP A/V PRESETS
1 Setup first your preferred settings for the following options (access
them through their respective menu page).
Listening Mode: Stereo
DSP Option: 5ms
Tone Controls: Tone Defeat: On
Display Setup: Set "Line 2" to "Listening Mode"
26
Speaker Setup: from the Speaker Setup menu, go to "Speaker
Configuration" sub-menu and change "Subwoofer" from "On" to "Off":
"Front" becomes "Large"
2 With the above settings, scroll to "A/V Presets Setup" from the SETUP
MENU page. Use [ S ] to access "A/V Presets Setup" menu.
3 At "A/V Presets" page, set "Preset: 1" to the following conditions as below.
Use [ D/F ] to select "Yes" or "No". Then, press [ A ], [ F ] and [ S ] to exit a
line item and move on to the next setting.