Wireless Connectivity; Wireless Signal Strength; Restore The Factory Settings And Password - NETGEAR JWNR2000Tv3 User Manual

N300 wireless router
Table of Contents

Advertisement

N300 Wireless Router Model JWNR2000Tv3

Wireless Connectivity

If you are having trouble connecting wirelessly to the router, try to isolate the problem, as
follows:
Does the wireless device or computer that you are using find your wireless network?
If not, check the Wireless LED on the front of the router. It should be lit. If it is not, you can
use the NETGEAR genie to turn the router's wireless radio back on (see
Wireless Settings
If you disabled the router's SSID broadcast, then your wireless network is hidden and
does not show up in your wireless client's scanning list. By default, SSID broadcast is
enabled.
Does your wireless device support the security that you are using for your wireless
network (WPA or WPA2)?
If you want to view the wireless settings for the router, use an Ethernet cable to connect a
computer to a LAN port on the router. Then log in to the router, and select Wireless (see
Basic Wireless Settings
Note:
Be sure to click Apply to save your changes.

Wireless Signal Strength

If your wireless device finds your network, but the signal strength is weak, check these
conditions:
Is your router too far from your computer, or too close? Place your computer near the
router, but at least 6 feet (1.8 meters) away, and see whether the signal strength
improves.
Are objects between the router and your computer blocking your wireless signal?

Restore the Factory Settings and Password

This section explains how to restore the factory settings, changing the router's administration
password back to password. You can erase the current configuration and restore factory
defaults in two ways:
Use the Erase function of the router (see
Use the Reset button on the back of the router. See
restore the factory settings and the router fails to restart, the unit might be defective. If the
error persists, you might have a hardware problem and should contact technical support
at http://www.netgear.com/support.
on page 65).
on page 25).
Erase
on page 62).
Factory Settings
Advanced
on page 97. If you
94

Advertisement

Table of Contents
loading

Table of Contents