Instructions For Putting Into Use; Important Safety Information - Central Pneumatic 60754 Owner's Manual

Instructions for putting into use

Read the ENTIRE IMPORTANT SAFETy INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURy FROM AccIDENTAL OPERATION:
Turn the power switch "OFF" and unplug the motor from its electrical outlet before
assembling or making any adjustments to the compressor Pump.
TO PREVENT SERIOUS INJURy AND DEATH FROM IMPROPER INSTALLATION:
ONLy a qualified engineer with appropriate certifications may attempt designing a new compressor
to ensure that all required safety and control elements are in place and will work together properly
and safely. This compressor pump is intended ONLy as a replacement for a similarly rated pump
on an existing compressor that includes all other needed components. constructing a new compressor
using this pump is not covered by this manual.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
components
cylinder Head
Pump Pulley
crankcase
Page 6 For technical questions, please call 1-800-444-3353.
Air Filter Assembly
cylinder
Oil Fill
Plug
Oil Sight
Glass
Oil Drain
Plug
Item 60754