Specifications; Unpacking; Instructions For Putting Into Use - Central Pneumatic 95386 Set Up And Operating Instructions Manual

SPecIFIcatIonS

Electrical
120 V~ / 60 Hz / 2 HP
Requirements
7.4 Running Amps
Amperage (Dedicated circuit
recommended)
Air Outlet Size 1/4" -18 NPT
Auto Shut-Off @ 115 PSI
Air Pressure
Restart @ 80 PSI
Air Tank Capacity 8 Gallons
5 SCFM @ 90 PSI
Air Flow Capacity
6 SCFM @ 40 PSI
SAE 30W non-detergent
Air Compressor Oil
Oil Type
(Sold separately)
(SKU 95048)

unPackInG

When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon
as possible.
note: There is a protective plastic piece
inserted underneath the Protective
Cover (12) to protect the product
during transit. This plastic piece
must be removed before using the Air
Compressor.
InStructIonS For
PuttInG Into uSe
read the entIre ImPortant
SaFetY InFormatIon
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
SKU 95386 For technical questions, please call 1-800-444-3353.
From accIdental
oPeratIon:
Push the Power button "oFF"
and unplug the air
compressor from its electrical
outlet before assembling or
making any adjustments to
the compressor.
note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
to PreVent
SerIouS InjurY
Page 8