Graco PD229521B Owner's Manual page 3

Installing the Base Using Vehicle Belt
You must carefully follow the instructions provided by your vehicle
manufacturer, in addition to the information in this manual.
If a front passenger seat is used, slide the
vehicle seat rearward as far as possible
from the dashboard. If a rear seat is used,
make sure the seat in front of it is moved
forward enough and is upright enough to
allow room for the infant restraint.
1. Make sure vehicle is on level ground in
order to get the correct recline position
2. Place the base
in a
rear-facing
position in a
forward-facing
vehicle seat.
3. Buckle the vehicle belt. Make sure the
buckle tongue goes into the correct buckle
The seat belt should not be twisted or
turned.
Lap Belt
3
.
Lap/Shoulder
Belt
.