Remote "Ac/Dc In" Control - Monster Power PowerCenter HTS2000 MKII Owner's Manual

Remote "AC/DC In" Control Hook-up
This feature connects your PowerCenter to an automated Home Theater control system or allows another component
with a remote "DC Out" connection to automatically turn on and off your PowerCenter HTS 2000 MKII.
A) Plug the AC power cable of the component you are using to control the PowerCenter HTS 2000 MKII
into an unswitched outlet on the PowerCenter HTS 2000 MKII. Note: This component must deliver
a control voltage between 3-30 volts DC.
B) Plug one end of the 1/8" miniplug (supplied) into the corresponding remote "DC In" connection
on the PowerCenter HTS 2000 MKII.
C) Plug the other end of the 1/8" miniplug into the Remote "DC Out" connection on the component
that you want to turn on and off the PowerCenter HTS 2000 MKII's Switched outlets when it is turned on.
12
HOOK-UP GUIDE
From Control
Component