Troubleshooting - Monster Power PowerCenter HTS2000 MKII Owner's Manual

Symptom Possible Cause
The PowerCenter The PowerCenter
HTS 2000 MKII is is not turned On.
not receiving power.
Too many devices
are connected, causing
an overload, tripping the
Thermal Circuit Breaker.
14

TROUBLESHOOTING

Remedy
• Turn the PowerCenter HTS 2000 MKII switch on.
• Make sure the PowerCenter HTS 2000 MKII's AC power plug
is plugged into a properly grounded 120 volts (nominal)
wall outlet.
• In some households, a wall switch may need to be thrown
to make the wall plug active. Try turning on the light
switches located near the wall unit.
• Press the PowerCenter HTS 2000 MKII Thermal Circuit
Breaker button in to reset. Please allow 10 minutes before
attempting to reset. If you reset too soon, the breaker will
prematurely sense power overload and not allow unit
to operate.
• If the Circuit Breaker continues to trip, try moving one
or more components to another PowerCenter HTS 2000
MKII. You may be drawing too much current through one
PowerCenter HTS 2000 MKII.