Hook-Up Guide (Remote Applications); Outlet Box Installation - Monster Power Home Theatre In-Wall PowerCenter 15 AMP Owner's Manual

HOOK-UP GUIDE - REMOTE APPLICATIONS
A Remote Application occurs when the TV display and components (receivers, PVRs, DVD players, VCRs, amplifiers, etc.)
are connected to different AC outlet receptacle banks. In this application, and for ultimate system protection, two
In-Wall PowerCenters should be used for proper installation and system production.
Note: When installing multiple PowerCenters, complete each installation section for each PowerCenter before proceeding
to the next step (for example, complete the Outlet Box Installation for both PowerCenters before proceeding to the Surge
Module Installation procedure).
Outlet Box Installation
For existing construction environments, you will need to cut a hole in your wall to first install the two gang outlet box
that will go behind your Monster In-Wall PowerCenter. Monster strongly suggests you enlist the help of a
licensed electrician, or someone experienced with home electrical wiring and custom installation.
If you are installing the Monster In-Wall PowerCenter into new home construction environments, the two gang outlet
box should already be in place and the line and ground wires already threaded through, ready for connection. In this
scenario, please proceed to the surge module installation section of these instructions.
Incoming
AC Circuit
•
I
I
I ..
~
Stereo Rack
Flatscreen TV
Romex Cable (connected to the back of each AC receptacle)
In-Wall
PowerCenter #2