Using The Controls - Jenn-Air JUD24FR*S Series Use & Care Manual

The control panels for both double drawer models are located in
the upper drawer. To view and set the Upper and Lower control
panel, pull out the upper drawer.
IMPORTANT:
Wait 24 hours after you turn on the refrigerator drawers before
you put food into the drawers. If you add food before the
drawers have cooled completely, your food may spoil.
NOTE: Adjusting the controls to a lower (colder) setting in one
or both drawers will not cool them any faster.
If the temperature is too warm or too cold in the drawers, first
check the air vents to be sure they are not blocked before
adjusting the controls.
The preset settings should be correct for normal household
usage. The refrigerator control is set correctly when milk or
juice is as cold as you like.
The freezer control is set correctly when ice cream is firm.
The actual temperature may differ from the display when a
drawer is open for an extended period of time.
Turning Drawers On/Off
Press and hold COOL ON/OFF for 3 seconds to turn on the
drawers. The indicator will light up.
Press and hold COOL ON/OFF for 3 seconds to turn off the
drawers.
Viewing Celsius Temperatures
Press the °C touch pad to change the temperature display
information from Fahrenheit to Celsius. The indicator light will
be on when the temperatures are shown in degrees Celsius.
To display temperatures in degrees Fahrenheit, press the °C
touch pad again. The indicator light will turn off.
Set to Recommended Temperatures
Press the SET touch pad to reset the set point to the factory
recommended temperature.
The recommended temperature for the refrigerator drawer is
37°F (3°C). The recommended temperature for the freezer
drawer is 0°F (-18°C).

Using the Controls

Adjusting Temperature Set Points
Style 1 - Double Refrigerator Drawers
The refrigerator control adjusts the temperature in both upper and
lower drawers.
Style 2 - Refrigerator/Freezer Drawers
The refrigerator control adjusts the temperature in the upper
drawer. The freezer control adjusts the temperature of the lower
drawer.
IMPORTANT: Wait at least 24 hours between adjustments.
Recheck the temperatures before other adjustments are made.
To adjust set point temperatures:
Press the refrigerator or freezer PLUS (+) or MINUS (-) touch
pad until the desired temperature setting is reached.
NOTE: The set point range for the double refrigerator drawers
model is 34°F to 48°F (1°C to 9°C). The set point range for the
refrigerator/freezer drawers model is 31°F to 43°F (0.6°C to
6°C) for the refrigerator drawer, and -3°F to 8°F (-19°C to
-13°C) for freezer drawer.
Max Cool or Max Freeze
The Max Cool or Max Freeze feature assists with periods of heavy
usage, full grocery loads or temporarily warm room temperatures.
Style 1 - Double Refrigerator Drawers
Max Cool will reset the temperature for both drawers to the
coldest setting 34°F (1°C) for a 24-hour period.
Style 2 - Refrigerator/Freezer Drawers
Max Cool will reset the temperature for both drawers to the
coldest setting 31°F (0.6°C) in the refrigerator drawer and -3°F
(-19°C) in the freezer drawer for 24 hours.
NOTE: The temperature display will remain at the coldest
setting(s) and the indicator light will remain on for a 24-hour
period. The drawer will automatically return to the previous
temperature set point(s) and the indicator light will turn off.
11