Using The Controls - Jenn-Air W10741583B Use & Care Manual

Using the Controls

The control panels for both double drawer models are located in
the upper drawer. To view and set the Upper and Lower control
panel, pull out the upper drawer.
IMPORTANT:
■ Wait 24 hours after you turn on the refrigerator drawers
before you put food into the drawers. If you add food before
the drawers have cooled completely, your food may spoil.
NOTE: Adjusting the controls to a lower (colder) setting in
one or both drawers will not cool them any faster.
■
If the temperature is too warm or too cold in the drawers, first
check the air vents to be sure they are not blocked before
adjusting the controls.
■
The preset settings should be correct for normal household
usage. The refrigerator control is set correctly when milk or
juice is as cold as you like.
■ The freezer control is set correctly when ice cream is firm.
■ The actual temperature may differ from the display when a
drawer is open for an extended period of time.
Turning Drawers On/Off
■ The first time that the drawers are plugged in, the control will
be in Cool Off mode. Cool On and Cool Off will be the only
options that display.
■
Press COOL ON for 3 seconds to turn on the drawers. All
menus and recommended temperature settings will be
displayed
Style 1: Refrigerator drawer models
.
Style 2: Refrigerator/freezer combo models
■ The left temperature and presets touch pads control the
temperature of the upper compartment.
■ The right temperature and presets touch pads control the
temperature of the lower compartment.
Viewing Celsius Temperatures
■ Press the F/C touch pad to toggle between displaying the
temperature in degrees Fahrenheit and degrees Celsius. The
corresponding indicator will illuminate.
A. F/C touch pad
Set to Recommended Temperatures
When the refrigerator is turned On for the first time, a
recommended temperature is set by default. The controls adjust
the temperature of both compartments independently.
■ To adjust set point temperatures, press "+" (plus) or "-"
(minus) until the desired temperature setting is reached.
Model JUD24FR*
NOTE: The set point for the double refrigerator drawers model is
37°F(2°C). The set point range for this model is 32°F to 42°F
(0°C to 5°C) for both compartments.
Model JUD24FC*
NOTE: The set point for the refrigerator/freezer drawers model is
37°F (2°C) for the refrigerator drawer and 0°F (-17°C) for the
freezer drawer. The set point range for the refrigerator/freezer
drawers model is 32°F to 42°F (0°C to 5°C) for the refrigerator
drawer and -8°F to 6°F (-22°C to -14°C) for the freezer drawer.
NOTE: Wait at least 24 hours between adjustments for the
product to acclimate.
Using Presets
For your convenience, each drawer also has controls that are
preset to recommended storage temperatures for specific
products.
Style 1: Refrigerator drawer models
Style 2: Refrigerator/Freezer combo models
A
11