Table of Contents
Advertisement
Features
When choosing the AIC-7901 you are taken to the top level of the configuration menu of this
controller. The following options cannot be displayed.
HostRAID is disabled (default):
HostRAID is enabled:
Terminating the SCSI configuration programme
Depending on the current menu level, you can display the previous menu by pressing the [ESC]
key. If you have made changes in the current menu you will be prompted to store them.
To quit the Configuration programme press the [ESC] key until a corresponding message is
Ê
displayed. Select Yes to quit.
Ê
Activating and Configurating Host RAID
To configurate HostRAID select the menu entry C
not displayed you have to activate HostRAID with the entry
Now the exsisting SCSI hard disks and alrady configurated RAID drives are displayed.
Select one of the displayed hard diks and configure the RAID-System to your needs.
Detailed instruction on the configuration of HostRAID are contained in the HostRAID
i
User's Guide.
The administration of the RAID system can be set later by a tool in your operating system
(see therefor the documentation "Storage Manager Browser Edition"). this tool currently is
available for Windows NT4 and Windows 2000.
10 - English
onfigure/View SCSI Controller Settings
C
SCSI Disk Utilities
Enable HostRAID Support
onfigure/View SCSI Controller Settings
C
onfigure/View HostRAID Settings
C
SCSI Disk Utilities
Disable HostRAID Support
onfigure/View HostRAID Settings.
Enable HostRAID Support
A26361-D1501-Z120-2-7419
If this entry is
.
Advertisement
Table of Contents
