Features - Fujitsu Siemens Computers D1501 Technical Manual

Table of Contents

Advertisement

Features

Mainboard in ATX format (305 mm x 244 mm)
Processor socket for Intel Pentium 4 or Celeron from 2.4 GHz and with 533 MHz System Bus
512 Kbyte on-die cache
Intel processor Pentium 4 with 533 MHz Front Side Bus. The size and clock frequency of first-
level cache and second-level cache are dependent upon the processor used.
Chipset: ServerWorks GC-SL (Grand Champion-SL) and CSB6
4 DIMM slots for DDR-RAM-memory modules 266 MHz with ECC; at least 256 Mbyte, a maximum
of 4 Gbyte memory configuration possible
four 64 bit PCI slots with 33 MHz
one 32 bit PCI slot with 33 MHz
special PCI slot for Zero Channel RAID Controller (the onboard SCSI controller AIC 7901 is used by
the ZCR-Controller)
SCSI controller AIC7901 One-Channel, Ultra 320 capable
Host RAID implemented with SCSI-Controller. The RAID levels 0,1 and 10 are supported.
Video-Controller ATI Rage XL with 8 Mbyte SDRAM
Gigabit LAN controller, Intel 82540EM (10/100/1000 MBit/s)
IDE hard disk controller connected to PCI bus for up to two IDE hard disks
mode capable, supports PIO modes 3 and 4
Floppy disk drive controller (possible formats: 720 Kbyte, 1.44 Mbyte)
Flash BIOS
system monitoring
System monitoring and temperature monitoring
Error log in EEPROM
SMBus (Server Management)
RSB (Remote Service Board)
Redundant power supply monitoring
Power-on functions:
Wake on RTC
Wake on LAN (LAN onboard)
Wake on PCI Cards (LAN)
COM1 wake up support (standby / soft-off)
Security functions:
Processor serial number
Cover monitoring: cover monitoring reports when the cover has been opened without
authorisation.
System, Setup and Keyboard password
parallel and serial ports can be deactivated
Floppy disk write-protection via BIOS Setup
Boot hard disk virus warning function
A26361-D1501-Z120-2-7419
Features
English - 3

Advertisement

Table of Contents
loading

Table of Contents