Installing Mezzanine Cards - Fujitsu PRIMERGY BX920 S2 Options Manual

7.2

Installing mezzanine cards

V
CAUTION!
Follow the safety instructions in the
page 15.
The following section illustrates how to install a mezzanine card in slot 2.
Ê Remove the server blade from the system unit and open it as described in
the chapter "Preparation" on page
Figure 21: Removing the mezzanine cards carrier
Ê Remove the carrier from the server blade housing by lifting it up, keeping it
as horizontal as possible.
BX920 S2
chapter "Safety instructions" on
19.
Options Guide
Mezzanine cards
45