6. Tip: Avoid pinching the wires. Attach the
Handlebar (6) to the Upright (4) with four M6 x
20mm Screws (88) and four M6 Split
Washers (50).
7. Insert the Main Wire (76) and the Frame Pulse
Wire (75) upward through the indicated hole in
the Upright (4).
8. While a second person holds the Console (7)
near the Upright (4), connect the wires on the
Console to the Main Wire (76) and the Frame
Pulse Wire (75).
Insert the excess wire into the Upright (4) or into
the Console (7).
Tip: Avoid pinching the wires. Attach the
Console (7) to the Upright (4) with four M4 x
16mm Screws (56).
6
4
6
50
88
7
8
7
Avoid pinching
the wires
11
Avoid pinching
the wires
4
75
76
56
4
75
76