NordicTrack NTEX03912.1 User Manual page 10

4. Slide the Shield Cover (5) upward onto the
Upright (4).
Have a second person hold the Shield Cover (5)
around the Upright (4) until you complete step 5.
Tip: Avoid pinching the wires inside the
Frame (1). Slide the Upright (4) onto the Frame.
Attach the Upright (4) with five M8 x 16mm
Screws (60) and five M8 Split Washers (61).
5. Locate the wire tie inside the Upright (4). Then,
locate the Main Wire (76) and the Frame Pulse
Wire (75) inside the Frame (1).
Tie the lower end of the wire tie to the ends of
the Main Wire (76) and the Frame Pulse
Wire (75).
Then, pull the other end of the wire tie upward
until the Main Wire (76) and the Frame Pulse
Wire (75) are routed through the Upright (4).
Then, slide the Shield Cover (5) downward and
press it onto the Right and Left Front Shields
(21, 22).
4
61
60
5
22
10
Avoid pinching
5
the wires
4
61
60
61
1
60
Wire Tie
5
Wire
Tie
75
4
1
21
76