NordicTrack 831.24978.0 User Manual page 17

16. See the side view drawing. Slide the Console
Base Back (104) upward to the handrail assem-
bly (I). Make sure that the flange on the Console
Base Back slides into the handrail assembly.
Note: You will need to tip the Console Base Back
(104) so that the flange can fit into the handrail
assembly (I). Also, the speaker wires (H) need to
fit into the slots in the Console Base Back.
Tighten ten #8 x 3/4" Screws (2) into the Console
Base Back (104) in the indicated locations.
17. Attach the Console Cover (105) with two #8 x
3/4" Screws (2).
Tighten the six 3/8" x 4" Screws (7). Then, press
the Base Covers (82, 83) into place.
16
Slot
2
2
104
17
82
7
17
H
Slot
104
2
2
Side View
I
Flange
105
2
2
83
7