D-Link DES-3010F Manual page 121

DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual
To establish the rule for a previously created CPU Access Profile:
In the CPU interface folder, click the CPU Interface Filtering State link to open the CPU Interface Filtering Table.
Figure 9- 6. CPU Interface Filtering Table
In this window, the user may add a rule to a previously created CPU access profile by clicking the corresponding Modify
button of the entry to configure, Ethernet, IP and Packet Content. Each entry will open a new and unique window, as
shown in the examples below.
Figure 9- 7. CPU Interface Filtering Table – Ethernet
To create a new rule set for an access profile click the Add button. A new window is displayed. To remove a previously
created rule, click the corresponding button. The following window is used for the Ethernet Rule configuration.
Figure 9- 8. CPU Interface Filtering Rule Configuration – Ethernet
To set the Access Rule for Ethernet, adjust the following parameters and click Apply.
108