Assembly - Fisher-Price Bubble Tractor Owner's Manual

F
WARNING
Children can be harmed by small parts,
sharp edges and sharp points in the vehi-
cle's unassembled state, or by electrical
items. Care should be taken in unpacking
and assembly of the vehicle. Children
should not handle parts, including the
battery, or help in assembly of the vehicle.
1
Steering Linkage
Indented Side Flat Side
• Slide a washer onto the steering linkage front axles.
• Slide a long bushing, long end first, onto each front axle.
• Slide a wheel, indented side first, onto each front axle.
Round Bushing
2
Wheel Front Axle
• Fit a round bushing, barrel end first, onto the end of a
front axle. Push the round bushing into the wheel.
• Fit a cap nut onto the end of the front axle.
• Tap the cap nut with a hammer to secure it on the
front axle.
• Repeat this procedure to secure the other wheel to the
other front axle.

Assembly

Front Axle
Washer
Long Bushing
Wheel
Cap Nut
3
Steering Linkage
• While lifting the front of the vehicle frame, fit the steering
linkage onto the fork on the front of the vehicle frame.
Make sure the center axle is toward the rear of the vehicle.
4
Grooved
Side
Smooth
Side
Handle
Bottom
• Position the handle bottom so that the smooth side
is upright.
• Insert the handle bottom peg into the hole in the side of
the vehicle frame, near the front end
• Turn the handle over so that the grooved side is
upright .
B
8
Fork
Vehicle Frame
Center Axle
Front View
Front of Vehicle Frame
B
A
Top View
.
A