Fisher-Price Bubble Tractor Owner's Manual page 12

17
Exhaust
Pipe
• Insert the tab on the exhaust pipe into the slot in the
cowling, as shown.
• Push the exhaust pipe down to "snap" it into place.
18
Rectangular
Hole
Bottom View
• Turn the vehicle frame over.
• Fit the bubble blower connector down through the
rectangular hole in the vehicle body.
Tab
Cowling
Slot
Bubble Blower
Connector
Assembly
19
Bubble
Blower
• Fit the bubble blower to the underside of the vehicle
frame, as shown.
• Insert six screws through the bubble blower and into the
vehicle frame. Tighten the screws with a Phillips screw-
driver. Do not over-tighten.
20
IMPORTANT! There are three electrical connections to be
made on this product. All three electrical connections must
be made in order for your product to function properly.
Please follow these instructions carefully.
• Turn the vehicle frame upright.
• Fit the bubble blower connector to the motor harness
connector. This is the second electrical connection.
Note: If the bubble blower connector will not plug into
the motor harness connector, turn it over and try again!
Do not force the bubble blower connector into the motor
harness connector.
12
Bottom View
Bubble Blower Connector
Motor Harness
Connector