Table of Contents
Advertisement
Setup
8.
Use the CURSOR PAD
brand name of your DVD.
9.
Press the CURSOR PAD
CODE Set, then use the CURSOR PAD
to choose the preset IR Code.
10. Use the CURSOR PAD
POWER " Test button.
These On-screen buttons are called " Soft
Keys ".
11. Press the SELECT button to pass the Power
command through the IR Mouse and onto the
DVD.
( Repeat steps 9 to 11 until finding the IR code
that will power up the A/V Receiver. If the DVD
turns ON, then you have found the correct
preset IR code ).
12. Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : Device Settings
DVD Settings
Brand Name
Hitachi
IR Code Set
Transmission Test
Test Button
Move
Change Brand Name
13. Use the CURSOR PAD
Input that connects to the video and audio
output of the DVD.
14. Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : Device Settings
DVD Settings
Brand Name
Hitachi
IR Code Set
Inputs settings
Video Input
Not Connected
Audio Input
Not Connected
Move
Change Source
15. Confirm all settings, then press the SELECT
button to move on to the next SETUP screen.
AV Net Setup Wizard : Device Settings
DVD Settings
Brand Name
Hitachi
IR Code Set
1
Video Input
Not Connected
Audio Input
Not Connected
All settings are complete!
Move
SEL
Select
82
or
to choose the
to highlight the IR
or
to highlight the "
,
,
and
to
(31/77)
1
(1/5)
POWER
CH
Back
Next
or
to select the TV
,
,
and
to
(31/77)
1
(1/5)
Back
Next
Select
SEL
(31/77)
(1/5)
Back
Next
16. Press the SELECT button to select YES to
Setup another device. Press the CURSOR
PAD
or
to highlight " No thanks, I'm done
", then press the SELECT button to exit the
A/V NET SETUP.
AV Net Setup Wizard : Device Settings
Congratulations!
Your DVD is now
connected to your AV network.
Would you like to setup another device?
No thanks, I'mdone.
Move
Select
SEL
Learning Mode
This function of the AV NET allows the user to use
equipment that is not supported by the AV/NET codes.
After programming your equipment to the AV NET and
the Soft Keys do not work, you can manually "LEARN"
each one by completing the Learning Mode. The
Learning Mode will transfer any remote control button
IR code of your equipment to the "Soft Keys" of your
AV NET.
Learning Mode (Example: A/V Receiver
Setup)
1.
Press the SELECT button to start the SETUP
WIZARD.
AV Net Setup Wizard
Welcome to the AV Net Setup Wizard.
Before starting this wizard, please make sure
that all devices are connected appropiately
and the IR blasters are placed in front of the
devices IR sensor.
Move
SEL
Return
2.
Use the CURSOR PAD
YES.
3.
Press the SELECT button to select.
4.
Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
Do you want to use an A/V Receiver.
Yes
No
Move
Select
SEL
Yes
Back
Start
or
to highlight
,
,
and
to
Back
Next
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
