Hitachi 55HDT52 Operating Manual page 26

How to Use the Remote to Control Your TV
DAY/NIGHT button
Press this button to toggle between Day and Night
picture mode settings. Select Day for day time
viewing with more brightness and contrast to
compete with room light. Select Night for night
time viewing with less brightness and contrast for a
more detailed picture (see page 44 for settings
changes).
NOTE: For automatic DAY/NIGHT picture mode
settings, see page 44.
PICTURE-IN-PICTURE button
See separate section on pages 31-33 for a
description.
MENU button
The MENU button will start the On-Screen Display.
INFO button
Press this button when you want to check the
channel being received, the picture source, if the
channel has stereo (ST) or second audio program
(SAP), the time, CHANNEL ID and if the TIMER is
set.
ANALOG/DIGITAL CHANNELS
Digital Closed
Caption. This icon
will appear only when
receiving a Digital Broadcast
with Closed Captioning.
Program Information
Sesame Street
9:30 AM 10:30 AM
Program Run Time
ST TV-14 V
DTv CC
INFO
Audio Broadcast
Broadcast
Rating
Telly and Baby Bears Story.
Picture mode
Day Off
Day/Night CC
setting
Closed
Caption setting
When an S-VIDEO Input is connected
to INPUT 3
INFO
Day Off
CC
When a Component Video: Y-PbPr
Input is connected to INPUT 1
INFO
Day Off
CC
NOTE: 1. The Sleep Timer info will show
momentarily after releasing INFO button.
2. The Aspect setting will not be shown if
the channel is locked.
26
Main Picture Source
and channel indication
Air 15-2
Broadcast channel
KPBS-DT
identification
1080i 11:00PM
Clock
Picture Format
Program Desctiption
16:9 Standard 1:00AM Event Timer. This
Icon will appear
only after the
Event Timer in the
Aspect Mode Timer Menu is
programmed.
S-IN:3
480i
11:00PM
4:3 Expanded
YPBPR:1
480i
11:00PM
4:3 Expanded
EXIT button
This button will exit all On-Screen Displays.
CURSOR PAD/SELECT button
All the On-Screen Display features can be set or
adjusted by using the CURSOR PAD, except for
numeric entries. The CURSOR PAD will highlight
functions or adjust and set different features. Press
the CURSOR PAD toward desired direction and
press the SELECT button to select.
GUIDE button
Press this button to access the TV Guide On
Screen TM interactive display (see page 54). Press
this button to access the Channel Guide of the
(CBL), and (SAT/STB) while in (CBL)(SAT/STB)
mode.
INPUTS button
When the remote control is in TV mode, press this
button to access the INPUTS menu. Use the
CURSOR PAD and SELECT button to select the
inputs that are being used. Pressing the INPUTS
button repeatedly will also cycle through the Inputs
menu items. Then press the SELECT button to
select.
Photo Input
IEEE 1394
Cable
Air
Input 1
Move SEL Sel.
INPUT 1 Select to choose INPUT 1.
INPUT 2 Select to choose INPUT 2.
INPUT 3 Select to choose INPUT 3.
INPUT 4 Select to choose INPUT 4.
INPUT 5 Select to choose INPUT 5.
CABLE Select to choose Cable.
AIR Select to choose Air.
PHOTO INPUT Select to access your pictures from a
digital camera, USB memory or
memory card USB drive connected to
the Photo Input in the side panel of
the Plasma TV (see pages 27-28).
IEEE1394 Select to choose the IEEE1394 Input
(see page 29).