Hitachi 55HDT52 Operating Manual page 81

Setup
15. If you would like to label your A/V Receiver
Source, use the CURSOR PAD
highlight " Yes " then press the SELECT
button to continue. Selecting " No " will
bypass the Source labeling.
AV Net Setup Wizard : A/V Receiver Setup
Brand Name Hitachi
IR Code Set 3 (3/12)
TV Input Not Connected
Monitor Out Not Connected
Optical Out Not Connected
Would you like to relabel the Source buttons?
Back
Move SEL Select
16. Use the CURSOR PAD
A/V Receiver Sources.
17. Use the CURSOR PAD
A/V Receiver Sources.
18 Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
Source Settings
Source Name
Source 1 ----------
Source 2 ----------
Source 3 ----------
Source 4 ----------
Source 5 ----------
Source 6 ----------
Source 7 ----------
Source 8 ----------
Source 9 ----------
Source 10 ----------
Move Change Name
19. Confirm all settings, then press the SELECT
button to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
Brand Name Hitachi
IR Code Set 3 (3/12)
TV Input Not Connected
Monitor Out Not Connected
Optical Out Not Connected
All settings are complete!
Move Select
SEL
20. Press SELECT to setup another device or use
the CURSOR PAD or
thanks, I'm done ", then press the SELECT
button to exit the A/V NET SETUP.
AV Net Setup Wizard : A/V Receiver Setup
Congratulations!
Your A/V Receiver is now
connected to your AV network.
Would you like to setup another device?
No thanks, I'mdone.
Move SEL Select
or to
AV NET SETUP WIZARD ( Example: DVD
1.
(44/54)
No Yes
or to select your
2.
or to label your
3.
4.
, , and to
Back Next
SEL Select
5.
6.
7.
(44/54)
Back Next
to highlight " No
Yes
Setup )
Press the SELECT button to start the SETUP
WIZARD.
AV Net Setup Wizard
Welcome to the AV Net Setup Wizard.
Before starting this wizard, please make sure
that all devices are connected appropiately
and the IR blasters are placed in front of the
devices IR sensor.
Move SEL Return
Use the CURSOR PAD or
Press the SELECT button to select.
(Select NO to setup other devices).
Use the CURSOR PAD , ,
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
Do you want to use an A/V Receiver.
Yes
No
Select
Move SEL
Use the CURSOR PAD ,
highlight the device.
( Example : DVD Setup ).
Press the SELECT button to select.
Use the CURSOR PAD , ,
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : Device Settings
Device Settings
Please select a device.
DVD DVD2
Cable Satellite
DVD Recorder PV Recorder
VCR VCR2
Custom
✓
Device is set.
Move Select
SEL
Back Start
to highlight NO.
and to
Back Next
, and to
and to
Back Next
81