Replace Fuser - Brother HL-4140CN Service Manual

Error message
No Tray
No Waste Toner
Out of Memory
Registration
(Registration Failed)
Replace Belt
Replace Drum

Replace Fuser

Replace Laser
Replace PF Kit MP
Replace PF Kit1
Replace PF Kit2
Description
The paper tray 1 is not installed before printing.
(The cassette of the T1 paper edge sensor is
open.)
The paper tray 1 is not installed.
The paper tray 2 is not installed before printing.
(The cassette of the T2 paper edge sensor is
open.)
The paper tray 2 is not installed.
The waste toner box is not installed.
Insufficient memory.
RAM area for secure data full.
Inter-color position alignment adjustment failure.
(Error, which cannot be recorded, occurs.)
Inter-color position alignment adjustment
failure.
(Toner of the color which is being used
reached the end of life.)
Inter-color position alignment adjustment
failure.
(Incorrect measurement value of inter-color
position alignment adjustment.)
Error in the adjustment of inter-color position
alignment result when implementing it.
Detection of incorrect registration sensor
measurement value when implementing
adjustment of inter-color position alignment.
Toner of the color which is being used reaches
the end of life when implementing adjustment
of inter-color position alignment.
Belt unit is at the end of life.
Belt unit is at the end of life.
(The operation is stopped.)
Drum unit is at the end of life.
Fuser unit is at the end of life.
Laser unit is at the end of life.
MP paper feeding kit is at the end of life.
Paper feeding kit1 is at the end of life.
Paper feeding kit2 is at the end of life.
2-18
Error Refer
codes to:
17 2-23
85 2-57
18 2-23
86 2-57
CE 2-75
C7 2-72
C8 2-72
10 2-21
11 2-21
12 2-22
8E 2-62
9D 2-66
9E 2-67
5E 2-42
7E 2-54
19 2-24
50 2-39
54 2-39
55 2-39
51 2-39
52 2-39
53 2-39
Confidential