Table of Contents
Advertisement
Using the printer
Loading paper
Loading paper
To load most types of paper:
1. Place the paper against the right side of the paper support with the print side facing you and the top of the paper feeding into the paper support.
2. Squeeze and slide the paper guide to the left edge of the paper.
NOTE:
Do not force paper into the printer.
NOTE:
To avoid smearing ink, remove each transparency or photo from the paper exit tray before the next one exits the printer. Transparencies and
photos may require up to 15 minutes to dry.
To load other paper types, follow these guidelines.
Load up to:
150 sheets of plain paper
10 envelopes
25 sheets of labels
50 sheets of card stock
10 greeting cards, index cards, postcards, or photo cards
50 sheets of coated, photo, or glossy paper
10 transparencies
100 sheets of custom size paper
10 iron-on transfers
Make sure:
The paper is designed for use with inkjet printers.
The envelopes are loaded vertically against the right side of the paper support.
l
The stamp location is in the upper left corner.
l
The envelopes are designed for use with inkjet printers.
l
You squeeze and slide the paper guide to the left edge of the envelope.
l
The labels are designed for use with inkjet printers.
The card stock is designed for use with inkjet printers.
l
The thickness does not exceed 0.025 inches.
l
The cards are loaded vertically against the right side of the paper support.
The glossy or coated side faces you.
The transparencies are designed for use with inkjet printers.
l
The rough side faces you.
l
Your paper size fits within these dimensions:
Width
76 to 216 mm
¡
3.0 to 8.5 in.
¡
You follow the loading instructions on the iron-on packaging.
l
Length
127 to 432 mm
¡
5.0 to 17.0 in.
¡
Advertisement
Table of Contents
