Axis NPS 530 Manual page 80

Network print server

Hide thumbs Also See for NPS 530:

Table of Contents

Appendix C: Protocol Support Upgrades

Upgrade using AXCFG

Notes:

The disk supplied with the NPS 530/532 contains AXCFG, a menu-

driven configuration utility for Novell NetWare and LAN Server/LAN

Manager that performs the tasks mentioned above. Follow the instruc-

tions given in the read.me file to install and use AXCFG.

Follow these steps to upgrade using AXCFG:

1. Start AXCFG and select your NPS 530/532 from the list of available

print servers.

2. If you are upgrading to Apple EtherTalk only, then skip to step 6.

3. Select TCP/IP MENU, then select TCP_KEY.

4. Type in the six-digit TCP/IP key, and click OK.

5. If you are upgrading to TCP/IP only, then skip to step 8.

6. Select APPLETALK MENU, then select ATLK_KEY.

7. Type in the six-digit AppleTalk key, and click OK.

8. Click SAVE, then click CANCEL to exit AXCFG.

• The protocol enable parameters TCP_ENB and ATLK_ENB will

automatically be set to YES when correct keys have been provided.

You can change these parameters later if you want to disable one or

both protocols.

• If you enter an incorrect key the parameter will remain empty.

• In order to prevent accidental loss of upgrade keys, it is not possible to

edit the key parameters further once the correct key has been entered.

Axis NPS 530/532 User's Manual

Table of Contents