In This Message Appears; Specifications; Class - Alpine NVE-N099P Owner's Manual

If this message appears
Various messages are displayed on the screen during operation. In addition to the messages
telling you the current status or providing guidance for the next operation, there are also the
following error messages. If one of these error messages is displayed, carefully follow the
instructions in the solution column.
Message
No DVD.
Please insert map DVD.
Unable to read data.
Check if map DVD is correct.
DVD check in process.

Specifications

Power requirement
Operating temperature (main unit)
Aerial type
Reception frequency
Reception sensitivity
Reception method
Pickup
External dimensions
Weight
Accessories
Product
Installation parts
Aerial
Remote control
Batteries (AAA)
Cause
• The disc has been removed.
• There was no disc in the system when
the power was switched on.
• A disc that this system cannot read
has been loaded.
• The disc is dirty or upside down.
• The disc cannot be read because of
condensation.
• A disc was just inserted
• Vibration or the like made it impossible
to read the disc.
14.4 VDC (11 – 16 V allowable)
negative ground
+14°F to +122°F (–10°C to +50°C)
Micro-strip planar aerial
1575.42±1 MHz
–130 dB max.
Parallel 12 channels
Wave length : 655 nm
Laser Power : CLASS II
Navigation unit (W × H × D)
Remote controller (W × H × D)
Navigation unit
Remote controller
Q'ty
1 set
Power connector
1 set 13-P RGB extension cable
1 set
Owner's manual,
2
Insert the disc (sold separately).
Insert the map disc (sold separately).
Take out the disc, check if it was upside
down, clean it if necessary, then re-
insert it.
Take out the disc, allow enough time for
the condensation to evaporate (about 1
hour), then re-insert the disc.
When the disc check is complete, the
following screen is displayed
automatically.
3
7– / " (196) × 1–
4
7
2" (51) × 1– /
16
2 lbs. 14 oz (1.3 kg)
2.1 oz (0.06 kg)
Product
audiopass, etc.
Solution
1 1
/ " (37.5) × 7– / " (189.5 mm)
2 2
5
" (36) × 4– / " (118 mm)
8
Q'ty
1
1
1 set
15