D-Link AirPro DWL-AB650 User Manual page 87

3. The DWL-AB650 Wireless Cardbus Adapter does not work properly
after the driver is installed.
Restart the computer. (In some cases, it will be necessary to restart
the computer after installing the drivers.)
In Windows XP, go to Start>Control Panel>System>Hardware
Tab> click on the Device Manager Tab> click on Network
Adapters> double click on D-Link AirPro DWL-AB650 Wireless
Cardbus Adapter> make sure that "This device is working
properly" is displayed under Device Status under the General Tab.
(Please refer to Checking the Installation of the Drivers for the
Wireless Adapter in the Networking Basics section of this manual
for more information.)
If the device is not working properly and a yellow exclamation mark is
displayed, then there is probably a resource conflict. In this case,
make sure the computer system has a free IRQ and if necessary,
uninstall the drivers, restart the system, and repeat the driver
installation procedure.
4. The wireless client cannot access the Internet in the Infrastructure
mode.
Make sure the wireless client is associated and joined with the
correct Access Point. To check this connection: Right-click on the
Networking Icon in the taskbar> select View Available Wireless
Networks. The Connect to Wireless Network screen will appear.
Please make sure you have selected the correct available network,
as shown in the illustrations below.
DWL-AB650 Wireless Multimode Cardbus Adapter
87