D-Link AirPro DWL-AB650 User Manual page 14

DWL-AB650 Wireless Multimode Cardbus Adapter
Please note that this type of installation requires that your ISP (Internet
Service Provider) provides you a static IP address for each computer and
the Access Point on your network. Please refer to the manual that came
with your Access Point to determine its configuration.
Please follow these steps to complete the installation:
1. Connect the Wireless Access Point (the D-Link AirPro DWL-
5000AP is shown in the example) to a Broadband connection.
2. Install the D-Link AirPro DWL-AB650 Wireless Cardbus Adapter
into the laptop computer(s) on your wireless network.
3. Check the Device Manager to confirm that the wireless adapter is
installed correctly. Please refer to the Networking Basics section in
this manual entitled: Checking the Installation of the Drivers for
the Wireless Adapter.
14