D-Link AirPro DWL-AB650 User Manual page 41

DWL-AB650 Wireless Multimode Cardbus Adapter
Option Tab
Under General Setting, check "Auto launch when Windows starts up" so
that AirPro automatically launches when Windows starts up. Check "Use IP
Setting in Profile" to enable the IP settings made under IP Config in the
Wireless Network Properties screen. If checked current IP settings will be
saved. If unchecked (and previously checked), previous IP settings will be
restored. If "Use Windows IP settings" is checked, IP settings from "Network
and Dial-up connections" will be used. Check "Disable Radio" to disconnect
the network connection without removing the WLAN cardbus adapter.
Under Advanced Settings, check "Enable Turbo Mode" to enable turbo
mode. Turbo mode can then take effect if you are using a turbo mode
enabled Access Point. Set the Encryption Type to Auto, WEP, or Advanced
Encryption Standard (AES). The Radio Frequency has been preset to
802.11a-5GHz.
Note: Currently, the Turbo Mode is only available in the United States.
The About Tab gives the utility version number of the AirPro utility.
41