Installation - D-Link AirPro DWL-AB650 User Manual

Installation

This section shows you how to install the AirPro Utility if you are using the
operating systems Windows 2000, 98, ME, or NT. Follow the instructions
given below on how to install the hardware (DWL-AB650 Cardbus Adapter)
and then the software (AirPro driver and utility). For those using Windows XP,
the installation procedure will be the same until the utility installation.
Windows XP has a built in utility for wireless devices. The AirPro
configuration utility does not need to be installed for users using the XP
operating system.
System Requirements:
A laptop computer with an available 32-bit Cardbus PC Card slot
At least a 300 MHz processor and 32 MB of memory
Cardbus Controller properly installed and working
An 802.11a Access Point (for Infrastructure Mode) or another
802.11a wireless adapter (for Ad-Hoc mode.)
1. Installing the DWL-AB650
Turn on the computer
Insert the D-Link AirPro
DWL-AB650 Wireless
Cardbus Adapter into an
available 32-bit Cardbus
PC Card slot.
DWL-AB650 Wireless Multimode Cardbus Adapter
19