Lan Settings - D-Link DAP-1160 User Manual

Section 2 - Configuration
My LAN
The DAP-1160 is set to Static IP by default.
Connection is: Select this option if you do not have a DHCP
server on your network, or if you wish to assign
a static IP address to the DAP-1160.
Static IP:
Select this option if you are manually assigning
an IP Address.
Dynamic IP:
Select this option if you would like to have an
IP Address automatically assigned to the DAP-
1160 by a DHCP server in your network.
IP Address:
192.168.0.50 is the default LAN IP Address of
the Access Point.
Subnet Mask:
255.255.255.0 is the default subnet mask.
All devices on the network must have the
same subnet mask to communicate on the
network.
Gateway
Enter the IP Address of the router in your
address:
network.
Enable DHCP
The default setting is disabled. Check this box
Server:
if you want to use the DAP-1160 as a DHCP
server to automatically assign dynamic IP
addresses on the network.
DHCP IP
If you have enabled the DHCP server function,
Address Range:
enter the starting and Ending point of the IP
address range for your network.
D-Link DAP-1160 User Manual

LAN Settings

23