Advanced; Port Forwarding - D-Link DAP-1160 User Manual

Section 2 - Configuration
This function is available if the DAP-1160 is in WISP Client Router or WISP Repeater mode. This feature allows you to open a single port
or a range of ports. Click Save Settings and the port forwarding rule will be put into the Port Forwarding List.
Check the box to configure a port forwarding
Port
Forwarding
rule.
Rules:
Name:
Enter a name for the rule. You can select an
application name from the Application Name
drop-down menu. Click the << button to fill in
the Name field with the application name that
you selected.
IP Address:
Enter the IP address of the computer on
your local network that you want to allow the
incoming service to.
Start Port/End
Enter the port or ports that you want to open.
Port:
If you want to open one port, enter the same
port in both boxes.
Traffic Type: Select TCP, UDP, or Both.
D-Link DAP-1160 User Manual

Advanced

Port Forwarding

25