Viewing Associated Wireless Client Information; Figure 7: Viewing Client Association Information; Table 9: Transmit/Receive - D-Link DWL-8600AP Administrator's Manual

D-Link UAP
Field
Interface
Status
MAC Address
VLAN ID
Name (SSID)
Transmit and Receive Information
Total Packets
Total Bytes
Total Drop Packets
Total Drop Bytes
Errors
V A
IEWING SSOCIATED
To view the client stations associated with a particular access point, click the Client Associations tab.
The associated stations are displayed along with information about packet traffic transmitted and received for each station.
Table 10 describes the fields on the Client Associations page.
Page 32

Viewing Associated Wireless Client Information

Table 9: Transmit/Receive

Description
The name of the Ethernet or VAP interface.
Shows whether the interface is up or down.
MAC address for the specified interface.
The UAP has a unique MAC address for each interface. Each radio has a different MAC
address for each interface on each of its two radios.
Virtual LAN (VLAN) ID.
You can use VLANs to establish multiple internal and guest networks on the same AP.
The VLAN ID is set on the VAP tab. (See
Wireless network name. Also known as the SSID, this alphanumeric key uniquely
identifies a wireless local area network.
The SSID is set on the VAP tab. (See
Indicates total packets sent (in Transmit table) or received (in Received table) by this AP.
Indicates total bytes sent (in Transmit table) or received (in Received table) by this AP.
Indicates total number of packets sent (in Transmit table) or received (in Received table)
by this AP that were dropped.
Indicates total number of bytes sent (in Transmit table) or received (in Received table) by
this AP that were dropped.
Indicates total errors related to sending and receiving data on this AP.
W C
IRELESS LIENT

Figure 7: Viewing Client Association Information

Software User Manual
"Configuring Load Balancing" on page
"Configuring Load Balancing" on page
I
NFORMATION
34CSFP6XXUAP-SWUM100-D13
12/10/09
62.)
62.)