Software User Manual
12/10/09
7. Click Update to save the rule.
8. Select New Rule from the Rule menu and create another rule with the following settings:
•
Action: Permit
•
Match Every: Clear the option
•
Protocol: IP
•
Address: 192.168.1.23
•
Wild Card Mask: 0.0.0.0
9. Click Update to save the rule.
10. Navigate to the Client QoS > VAP QoS Parameters page.
11. From the Client QoS Global Admin Mode option, select Enabled.
12. From the VAP menu, select VAP 2.
13. Select the Enabled option for QoS Mode.
14. From the ACL Type Up menu, select IPv4.
15. From the ACL Name Up menu, select acl1.
34CSFP6XXUAP-SWUM100-D13
D-Link UAP
Configuring Client QoS
Page 127