Installation - Kidde KN-COPP-3 Owner's Manual

120 v ac and self-recharging battery backup carbon monoxide alarm with digital display, test, and peak level memory
Hide thumbs Also See for KN-COPP-3:
Table of Contents

Advertisement

Installation

Recommended Installation Locations
Your Kidde CO alarm should be mounted in or near bedrooms
and living areas. It is recommended that you install a Kidde
CO alarm on each level of a multi-level home. You may use
the number and location of smoke alarms installed in your
home according to current building code requirements as a
guide to the location of your Kidde CO alarm(s).
When choosing your installation locations or the number of
alarms that may be required, make sure that you can hear the
alarm from all sleeping areas. If you install only one carbon
monoxide alarm in your home, install the alarm near
bedrooms, not in the basement or furnace room.
Two labels have been provided with important information
on what to do in case of an alarm. Add the phone number
of your emergency service provider in the space provided.
Place one label next to the alarm after it is mounted, and
one label near a fresh air source such as a door or window.
CAUTION:This alarm will only indicate the presence of
carbon monoxide at the sensor. Carbon monoxide may be
present in other areas.
IMPORTANT: Improper location can affect the sensitive
electronic components in this alarm. Please see the next
section describing where NOT to install this alarm.
Recommended Locations
DINING
KITCHEN BEDROOM
BEDROOM
LIVING ROOM
BEDROOM
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents