Peripheral Devices And Supplies; Peripheral Devices - Sagem MF9300 Operation Manual

6
Chapter 6

PERIPHERAL DEVICES AND SUPPLIES

Optional equipments and supplies are explained in this chapter. To purchase optional equipment and supplies
contact your authorised service representative.

PERIPHERAL DEVICES

FINISHER (SG-FN3) See page 77.
500-SHEET PAPER FEED UNIT (SG-CP3) See page 78.
2 x 500-SHEET PAPER FEED UNIT (SG-CP4) See page 78.
DOCUMENT COVER (SG-DC1)
REVERSING SINGLE PASS FEEDER (SG-RSPF) See page 79.
JOB SEPARATOR TRAY KIT (SG-JST1)
This enables separation of output locations by mode (copy, printer, etc.).
PRINTER EXPANSION KIT (SG-KI1)
This allows the machine to be used as a network printer.
PRINT SERVER CARD (SG-PSC)*
This optional expansion kit adds the network printer function (10/100 BASE-TX).
PS3 EXPANSION KIT (SG-PEK)*
This kit offers PostScript 3 compatibility.
NETWORK SCANNER EXPANSION KIT (SG-NS1)*
This allows the machine to be used as a network scanner.
FACSIMILE EXPANSION KIT (SG-FEK2)
This allows the machine can be used as a facsimile machine.
8MB FAX MEMORY (SG-MM8)
Image memory can be expanded by installing the optional fax expansion memory.
1
* Requires installation of the PRINTER EXPANSION KIT (SG-KI1).
2
* Requires installation of the PRINTER EXPANSION KIT (SG-KI1), and 128MB or more of memory must be
extended.
• A commercial 64/128/256/512MB (the 168 pin SDRAM DIMM) memory module can be used to expand
Note
memory in this unit. For more information, consult your authorised service representative.
• Some options may not be available in some countries and regions.
76
1
1
2