Before Using The Machine; Part Names And Functions - Sagem MF9300 Operation Manual

1
Chapter 1

BEFORE USING THE MACHINE

This chapter contains basic information that should be read before using the machine.

PART NAMES AND FUNCTIONS

Exterior
Reversing single pass feeder (RSPF) (optional)
1
Place the original(s) that you wish to scan face up
here. (p.23)
Document cover (optional)
2
Place an original on the document glass and close
the document cover before copying starts.
Document glass
3
Place an original that you wish to scan face down
here. (p.22)
Power switch
4
Press to turn the machine power on and off. (p.13)
Handles
5
Use to move the machine.
Operation panel
6
Contains operation keys and the touch panel.
(p.10)
Job separator tray (upper tray) (optional)
7
Print jobs and received faxes are delivered to this
tray.
8
2
3
6
4
10 5
1
7
12
8
9
13
10
Centre tray
8
Finished copies are delivered to the centre tray.
Front cover
9
Open to remove paper misfeeds and perform
machine maintenance. (p.66)
Paper trays
10
Each tray holds 500 sheets of copy paper. (p.15)
Upper right side cover
11
Open to remove misfeeds when an optional job
separator tray kit or a optional finisher is installed.
(p.70)
Side cover
12
Open to remove misfeeds. (p.66)
Side cover handle
13
Pull to open the side cover. (p.66)
Bypass tray paper guides
14
Adjust to the width of the paper. (p.18)
11
14
15
16