Staple Jam Removal; Total Output Count - Sagem MF9300 Operation Manual

TROUBLESHOOTING AND MAINTENANCE

STAPLE JAM REMOVAL

If staples become jammed in the stapler, the message "CHECK STAPLER POSITION OR STAPLE JAM." will appear.
Follow these steps to remove the jammed staples.
1
Open the stapler cover.
2
Grasp the green portion of the staple
box and remove the staple box from
the stapler.
3
Raise the lever at the end of the staple
box and remove the jammed staples.

TOTAL OUTPUT COUNT

The total output count can be displayed as explained below.
The output count shows the combined output total of the copy, fax, and printer functions.
Checking the total output count
Hold down the [COPY] key. The total output count appear while the key is held down.
COPY
PRINT
74
4
Return the lever to its original
position.
5
Insert the staple box into the stapler
unit until it clicks into place.
6
Close the stapler cover.
TOTAL OUTPUT : 0,123,456
SPECIAL MODES
2-SIDED COPY
OUTPUT
A4
A3