Table of Contents
Advertisement
Quick Start Guide
Connection Diagrams
6
* Available only with SAGEM AXIUM HD-L32 T.
Basic Connection for Analog TV
Basic Connection for Digital TV
(DTV)* and AV
RF LOOP
THROUGH
CABLE
Getting Started
1.
Unpack your LCD TV.
LCD TV
Remote control
Two (2) AA alkaline batteries
6-in-1 CF adaptor*
Power cord
RF (aerial) lead
This user's guide
Display stand
Five (5) M8*30 capscrews
Two (2) M8*100 capscrews
Two (2) washers for M8*100 capscrews
Hexagon key
2.
Disconnect power to all your existing equipment.
3.
Locate unit in preferred position.
4.
Connect all equipment as shown in the diagram on the adjacent page.
5.
Once all other connections are made, connect power and switch on your unit.
Remote Control Modes
The remote control must be in the same mode (analog or digital*) as the LCD TV in order for it to work
properly. The Power/Status LED at the front of the unit indicates the current mode of your unit (see 2-1
Front Panel Controls for the different modes and the corresponding LED indicator color).
When the remote control is in analog mode, the TV button on your remote control will light up in green
each time a button on the remote control is pressed. When the remote control is in digital mode*, the
DTV button on your remote control will light up in yellow each time a button on the remote control is
pressed.
LCD TV POWER LED
REMOTE CONTROL
GREEN
GREEN TV BUTTON
AMBER
YELLOW DTV BUTTON
* Available only with SAGEM AXIUM HD-L32 T.
Quick Start Guide
3
4
8
9
MODE
ANALOG TV
DIGITAL TV*
7
Hide quick links:
Advertisement
Table of Contents
