Connecting A Vcr Using Coaxial (Rf); Connecting A Scart Device - Sagem AXIUM HD-L32 User Manual

Chapter 5 Connecting External Devices
5-3

Connecting a VCR Using Coaxial (RF)

5-3-1 Video Recorder without Decoder
To record digital programmes from your LCD TV, the VCR must be connected to a SCART
connector.
NOTE: If your VCR does not have a SCART connector, the only connection
possible is via the aerial cable. You will therefore need to tune in
your video recorder's test signal and assign it to a program number.
In this case, it will not be possible to record digital channels.
5-3-2 Video Recorder with Decoder
Connect the decoder to the second SCART connector on your video recorder. You will then
be able to record scrambled transmissions.
WARNING! If an outdoor antenna or cable system is connected to your LCD TV,
make sure that the antenna or cable system is correctly grounded.
28
AV1
ANTENNA
RF lead
SCART lead
(supplied)
(optional accessory)
VCR
SCART lead
(optional accessory)
DECODER
5-4

Connecting a SCART Device

1. Connect one end of a 21-pin Euro-SCART lead (not supplied) to your device and the
other to the SCART connector on the back of your LCD TV. See 2-2 Back Connectors
for location.
2. Turn on your LCD TV (see 4-5 Turning ON the Power), then press the AV button
repeatedly to select either AV1 or AV2, depending on to which connector your SCART
device is connected.
NOTES: The picture format (16:9) is automatically detected by your unit.
Chapter 5 Connecting External Devices
SCART
Devices
29