Table of Contents
Advertisement
QUICK START GUIDE
Display Stand Installation
The display stand may not be already assembled when you receive your unit. If it is not, follow the
procedure below to install it to your unit before you continue.
1. Remove the protective cover and hinge cover on the back
of your LCD TV.
2. Remove the hinge cover on the back of your LCD TV.
3. Fasten the two (2) M8*100 capscrews with washers to
the bottom of the glass display stand using the provided
hexagon key.
NOTE: The washers are necessary to prevent damage to
the glass when fastening the capscrews.
4
Back of LCD TV
Back Protective Cover
Back of TV with Protective Cover
and Hinge Cover Removed
Hinge Cover
3
4. Attach the display stand to the back of your LCD TV with
two (2) M8*30 capscrews using a hexagon key to tighten
the capscrews.
5. Fasten the hinge cover with the three (3) M8*30 capscrews
that were removed in Step 1 using the provided hexagon
key.
6. Fasten the back protective cover that was removed in
Step 1.
Quick Start Guide
4
Glass Display Stand
LCD TV with Display Stand Attached
Hinge Cover
Back Protective Cover
5
6
5
Hide quick links:
Advertisement
Table of Contents
