Chapter8 Advanced Settings and Functions
8-6
Multi-channel View Mode
To activate channel scan, press the MOSAIC button. Press this button again to stop channel
scan and return to the main source.
NOTE: This feature is only available in Analog Mode.
8-7
Picture Formats
Press the FORMAT button repeatedly to move through the different picture format options.
Each time that you press the FORMAT button on your remote control, the display format
information will show at the top-left corner of the display for a few seconds.
4:3
Displays a 4:3 input picture at its standard 4:3 size without any distor-
tion. Black bands will be visible down the left and right sides of the
picture.
14:9
Displays the picture enlarged to 14:9 format with part of the top and
bottom of a 4:3 image cut off. Thin black bands are visible on both the
right and left sides of the picture.
16:9 (full screen)
Displays a true 16:9 picture full screen with no distortion.
Zoom
Enlarges or reduces the original picture without distorting it. Use
to change the zoom factor. Use
Panorama (4:3 stretch)
Displays a 4:3 input picture stretched to full screen. The picture is
progressively stretched from the center third of the screen outward.
56
to move the picture up and down.
9
DIGITAL TV (DTV)*
9-1
Advanced Digital TV Settings
Access the DTV OSD main menu by pressing the DTV MENU button on your remote
control.
NOTE: In general, press OK to confirm selection.
Return to the previous OSD menu by pressing the BACK button.
Exit from the OSD menu by pressing the EXIT button.
9-1-1 Box Settings
CHANNEL TUNING
It is recommended that you perform a channel
search each month to keep your digital TV channels
up-to-date.
TO TUNE CHANNELS
1. From the Box Settings Menu, select CHAN-
NEL TUNING and press OK.
2. An indicator at the bottom of the screen indi-
cates the percentage of the scanned frequency
band. The current frequency found is displayed
in real time.
3. A message at the end of the scanning process
will ask you to save. Press OK.
You can cancel the scanning process at any time
by pressing EXIT.
* Available only with SAGEM AXIUM HD-L32 T.
57