Gprs - HTC Touch User Manual

146 Getting Connected

10.4 GPRS

Use GPRS (or EDGE, if available) to connect to the Internet and to send and
receive picture messages on your device. You will need a data plan to use
your wireless service provider's GPRS network. Check with your wireless
service provider to find out about GPRS rates.
GPRS settings are already preconfigured on your device, and your device is
ready to use your wireless service provider's GPRS services. Please do not
change the settings as this may cause services to stop working.
To add a new GPRS connection
In times when you need to add another GPRS connection on your device,
obtain the Access point name from your wireless service provider. Also,
check if a user name and password are required.
1. Tap Start > Settings > Connections tab > Connections.
2. Under Rogers Internet, tap Add a new modem connection.
3.
On the Make New Connection screen, enter a name for the
connection.
4. In the Select a modem list, select Cellular Line (GPRS), then tap
Next.
5. Enter the Access point name, then tap Next.
6.
Enter the user name and password, only if required.
7. Tap Finish.