Gprs/G - HTC Touch cruise User Manual

146 Internet
GPRS/3G
Use GPRS/3G (or EDGE, if available) to connect to the Internet and to send and
receive e-mail and picture messages on your device. You will need a data plan to
use your wireless service provider's GPRS/G network. Check with your wireless
service provider to find out about GPRS/G rates.
If you completed the Connection Setup process for auto-configuring the data
connection the first time you turned on your device, your device is then ready
to use your wireless service provider's GPRS/G services. Do not change the
connection settings as this may cause services to stop working.
Note
If you did not complete the auto-configuration process before, follow the instructions
in "To manually select the network operator to use for data connections" in Chapter
1 to configure the data connection for your device.
To add a new GPRS/3G connection
When you need to add another GPRS/G connection on your device, obtain the
Access point name from your wireless service provider. Also, check if the GPRS/G
network requires a user name and password.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the Connections tab, tap Connections.
3. In My ISP, tap Add a new modem connection.